Skip to content

StarFun APK Guide: EQ & Firmware for Huilian AirPods Replicas ​

StarFun is the companion app for AirPods replicas built on Huilian chipsets (the 247, 277, 377 and 377H3). It does for Huilian models what FlyCC does for Airoha and TigerBuilder models: you use it to adjust the EQ and to update the firmware. If you own a Huilian replica such as the AirPods Pro 3 V7 Huilian or the Pro 2 V5.4, StarFun is the app to install.

Quick Answer: StarFun is the app for Huilian-based AirPods replicas: the AirPods Pro 3 V7 Huilian and V6 Huilian, the AirPods Pro 2 V5.4 and V5.3 Huilian, and the AirPods 4 V2 Huilian. Get it as an Android APK or from the iOS App Store via Useful Apps. Use it to adjust EQ and, only when something is broken, to update firmware. TigerBuilder models use FlyCC instead. If no app connects to your earbuds, they're probably a low-tier Jieli clone.

Which replicas use StarFun ​

These are the versions in the guide whose version tables list StarFun as the app for EQ and settings:

ModelVersionChipsetiCloud Connect
AirPods Pro 3V7 HuilianHuilian 377H3✅
AirPods Pro 3V6 HuilianHuilian 247✅
AirPods Pro 2V5.4 HuilianHuilian 377✅
AirPods Pro 2V5.3 HuilianHuilian 277 Pro Max✅
AirPods 4V2 HuilianHuilian 247✅

The AirPods 3 table also lists StarFun for the V1.2 (Huilian A10), but the trusted sellers don't currently list any AirPods 3.

These five are also the guide's iCloud Connect models. iCloud Connect is exclusive to Huilian-based replicas, so if you bought a pair for switching between your Apple devices, StarFun is your app. Compare versions on the Pro and AirPods version pages.

Download StarFun for Android or iOS ​

StarFun comes in two versions, both linked on Useful Apps:

The Android version is an APK rather than a Google Play download. If Android blocks the install, enable Install from unknown sources (also called Install unknown apps) for your browser or file manager. You'll usually find it under Security or Accessibility in your settings. Then open the downloaded .apk file and tap Install.

Before you open StarFun, connect the earbuds to your phone in its normal Bluetooth settings.

Adjust the EQ ​

The EQ can vary by seller, so the same version can sound different from one batch to the next. StarFun is the app the guide recommends for adjusting EQ on Huilian devices, just as FlyCC is for TigerBuilder and BullSuper is for HR. On the AirPods 4 V2 Huilian, custom StarFun EQ profiles sync directly across to iOS.

Don't want to tune from scratch? Community members share their own EQ settings on Discord (see the end of this guide). For how replicas sound out of the box, read Sound Quality.

Update the firmware with StarFun ​

Start with the community's cardinal rule: if it works, don't touch it. Firmware updates are released mainly to fix breakage from major iOS updates or serious hardware bugs. If your earbuds connect smoothly and sound right, updating only adds the risk of bricking them.

If you do need an update, go through the safety checklist first:

  1. Charge both earbuds and the case above 80%.
  2. Keep the case connected to power during the update.
  3. Leave both earbuds seated in the case with the lid open.
  4. Keep your phone's screen awake so the transfer doesn't stall.

Then update in StarFun:

  1. Make sure the earbuds are connected to your phone and the lid is open.
  2. Open StarFun and tap the Settings / Firmware icon.
  3. Check the current firmware version against the latest cloud release.
  4. Tap Upgrade. The app writes the configuration blocks one after another.
  5. After the earbuds reboot, forget them in your phone's Bluetooth menu and do a soft reset.

Only use StarFun on Huilian earbuds. Flashing firmware meant for a different chipset can brick the earbuds, and firmware meant for an Airoha chip instantly bricks a Huilian board.

If the update freezes at a percentage for more than 5 minutes, don't close the lid or take the earbuds out. Retry or restart the app with the earbuds still in place. If the earbuds stop responding completely, follow the hard reset in How to Reset Fake AirPods, then reopen StarFun. In most cases the update can be flashed again from 0%. The firmware update guide covers every chipset.

StarFun won't find your earbuds? ​

Work through these in order:

  • Pair them in Bluetooth settings first. StarFun needs the earbuds already connected to your phone.
  • Check the chip. StarFun is for Huilian models. TigerBuilder (Airoha) models use FlyCC, and HR models use BullSuper. The standard way to identify your chip is to try the apps on Useful Apps one at a time and see which one connects.
  • No app connects at all? Then your pair is probably a very low-tier clone on a Jieli chipset, which none of the community apps support. Genuine Apple AirPods won't respond to these apps either.
  • Connection keeps dropping? Clear the pairing cache with a controller reset from the reset guide. For pairing problems in general, see Fake AirPods Won't Connect.

Ask the community ​

Want a starting EQ instead of tuning from zero? Community members share their own EQ settings on the AirReps Discord, and most presets are pinned in #help-and-advice. Tell them which Huilian version you own when you ask.

FAQ ​

Is StarFun available on iPhone?

Yes. StarFun is on the iOS App Store as well as an Android APK. Both are linked on Useful Apps.

Which AirPods replicas work with StarFun?

Huilian-based replicas: the AirPods Pro 3 V7 Huilian and V6 Huilian, the AirPods Pro 2 V5.4 and V5.3 Huilian, and the AirPods 4 V2 Huilian. The firmware guide lists the Huilian 247, 277, 377 and 377H3 chipsets for StarFun.

Which app do TigerBuilder replicas use?

FlyCC. TigerBuilder models, including the AirPods Pro 3 V7 TB, use FlyCC, and StarFun is for Huilian chipsets. Flashing firmware meant for a different chipset can brick the earbuds, so always match the app to your chip.

Where do I download the StarFun APK?

From the StarFun download link on our Useful Apps page. If Android blocks the install, enable "Install from unknown sources" in your settings.

Released under the GPLv3 License. · Privacy