FlyCC APK Guide: How to Configure & Tune Airoha AirPods Replicas

FlyCC is the essential companion app for AirPods replicas running Airoha chipsets (including the Airoha 1562AE, 1562E, 1562F, and 1571AM). Because Apple's native iOS settings only expose surface-level controls, FlyCC provides low-level access to the silicon: custom parametric EQ tuning, touch sensor calibration, Active Noise Cancelling (ANC) balancing, and OTA firmware flashing.

Quick Answer: FlyCC is a free, third-party Android and macOS utility specifically designed for Airoha-based AirPods replicas. It lets you customize sound profiles via a built-in equalizer, modify pinch/tap sensitivity, and flash over-the-air firmware updates. It will not detect replicas powered by Huilian, BES, or budget Jieli chips.

Android or Mac required

FlyCC cannot be installed from the Apple iOS App Store due to Apple's third-party hardware restrictions. To configure your Airoha earbuds, install the Android APK on any Android smartphone, or run the community macOS release. Settings saved to the earbuds persist even when switched back to an iPhone.

Supported chipsets

FlyCC works exclusively with Airoha hardware. If your earbuds connect, you have confirmed genuine Airoha silicon inside:

• Airoha 1562AE / 1571AM — Full feature support: dual-mic ANC calibration, custom EQ, head-tracking spatial audio toggles, and OTA updates.
• Airoha 1562E / 1563E — Standard EQ, touch controls, and firmware tools.
• Airoha 1562F — Legacy ANC and EQ controls.

If FlyCC scans indefinitely and never detects your earbuds, your pair uses a different manufacturer's silicon (such as Huilian, which uses Starfun, or TigerBuilder, which uses CloudCC) or an entry-level Jieli chip.

How to download and install FlyCC safely

Because FlyCC communicates with non-MFi Bluetooth hardware, it is distributed directly as an APK rather than through Google Play.

1. Download the latest verified APK directly from the Useful Apps directory.
2. On your Android device, navigate to Settings → Security and enable "Install unknown apps" for your browser or file manager.
3. Open the downloaded .apk file and tap Install.
4. Grant the requested Bluetooth / Nearby Devices and Location permissions. (Android requires location permissions to scan for Low Energy Bluetooth peripherals; FlyCC does not track GPS data).

Key features and how to use them

1. Custom EQ and audio tuning

Out of the box, some replica batches carry an exaggerated bass response. FlyCC includes a 10-band equalizer to refine audio output:

• Bass reduction: Lower the 31Hz, 62Hz, and 125Hz sliders by 2–3dB for a cleaner, more neutral soundstage matching retail AirPods Pro.
• Vocal clarity: Raise the 1kHz and 2kHz bands by 1.5dB to bring forward podcasts and vocals.
• Saving to hardware: Once adjusted, tap Save to Earbuds. The acoustic tuning is written directly to the Airoha DSP, meaning the custom EQ remains active when you reconnect to your iPhone, iPad, or PC.

2. Touch and gesture calibration

If your earbuds trigger accidental pauses when adjusting them in your ear, FlyCC allows you to adjust force sensor sensitivity from 1 (lightest tap) to 5 (firm squeeze). You can also remap single, double, and triple presses to specific functions.

3. Noise cancellation tuning

In the ANC menu, FlyCC allows independent calibration of the left and right feedforward microphones. If one earbud feels like it has higher cabin pressure or weaker cancellation, the calibration slider rebalances the phase inversion.

Safe firmware updating (OTA)

FlyCC can flash updated firmware binaries to fix iOS handshake bugs or improve connectivity. However, flashing carries an inherent bricking risk if interrupted:

1. Charge both earbuds and the case above 80% before starting.
2. Keep the charging case open with both earbuds seated inside within 30 centimeters of your phone.
3. Tap Check for Updates in FlyCC. If an update is available, download the package.
4. Tap Start Update. Do not close the case lid, turn off Bluetooth, or switch apps until the progress bar reaches 100% and displays "Update Succeeded."
5. Once complete, leave the earbuds in the closed case for 60 seconds before re-pairing.

For a comprehensive guide on flashing all replica chipsets safely, read How to Update Fake AirPods Firmware.

Troubleshooting FlyCC connection issues

If FlyCC refuses to see your earbuds:

• Check your phone's active audio connection: Ensure the earbuds are already paired in Android's native Bluetooth settings before opening FlyCC.
• Grant Nearby Devices permissions: On Android 12 and newer, FlyCC cannot detect Bluetooth LE devices without the "Nearby Devices" permission enabled.
• Identify your chip: If your earbuds refuse to connect to FlyCC, try scanning with CloudCC or Starfun. If no app connects, see How to Spot Fake AirPods to check for a budget Jieli clone.
• Clear pairing cache: If connections drop, perform a controller reset using our Reset Guide.

Related guides

• Using reps with Android daily? See AirPods Replicas on Android.
• Need other chip utilities? Check the complete Useful Apps catalog.
• Earbuds refusing to connect? Walk through Fake AirPods Won't Connect.
• Looking for verified Airoha models? Browse the Trusted Seller Directory.

FAQ

Is FlyCC safe to install on my phone?

Yes. The APKs hosted in the community Useful Apps directory are extracted from official manufacturer supply chains and verified clean of malware. It only requires Bluetooth access to communicate with the Airoha audio processor.

Can I use FlyCC on an iPhone?

No. Apple does not allow third-party apps to access raw Bluetooth serial profiles for non-MFi hardware. You must use an Android phone or a Mac to change FlyCC settings. However, all EQ and control changes write permanently to the earbuds' internal memory, so they carry over to your iPhone automatically.

Why does FlyCC say "Device Not Found"?

The most common reason is silicon mismatch: FlyCC only works with Airoha chips. If you own a Huilian model, use Starfun; if you own a TigerBuilder model, use CloudCC. If none connect, you likely have a budget Jieli unit.